UDE Memtool FLASH memory programming

UDE Memtool is designed for On-Chip FLASH memory programming and On-Board FLASH / OTP memory programming with microcontroller hardware systems using C166, C166CBC, C166S-V2, XC166, XC2000, XE166, ST10, ST30, TriCore, PowerPC, Arm7, Arm9, Arm11, Cortex-M0, Cortex-M3, Cortex-M4, Cortex-M7, Cortex-R4, Cortex-R52, SuperH SH-2A derivatives.

General Features of FLASH memory programming

High-speed data communication by using the debug channel between target system and the debugging tool Universal Debug Engine based on the Universal Access Device Communication Hardware or Host interfaces
Automatic adaptation of data to be programmed to the smallest memory block size by automatic read operations
Easy-to-Use: FLASH programming is integrated in the debugger-to-target program download in the UDE Memtool Add-In. User created front-ends are possible with the UDE standalone Memtool.
Transparent Erase Mode: previous bank read and bank erase simulate random access for non-bytewise erasable FLASH memories.

Supported Functions of FLASH programming

UDE Memtool offers following functions (depending on the type of memory):

Erasing the entire memory module
Erasing selected sectors of the memory module
Loading Intel Hex and Motorola S-Record files
Programming all or selected portions of the file into the memory module
Comparing all or selected portions of the file to the current contents of the memory module
Read back and save-to-disk of the current memory content
Setting and Resetting the Chip/Sector Protection (On-Chip only)
Calculating CRC sums of sections
Watchdog handling for some derivatives
UCB (User Configuration Blocks) , ABM (Alternate Boot Mode) , BMI (Boot Mode Index) header handling for some derivatives
ABM (Alternate Boot Mode) header handling for some derivatives
BMI (Boot Mode Index) header handling for some derivatives
Support of Protection Function
Support of the single-chip Reset Mode of the new C16x derivatives.

UDE Memtool can handle more than one memory module on the target system and is only using on-chip RAM for execution (IRAM; XRAM when available). UDE Memtool supports the single-chip reset mode of the new C166 derivatives.

Communication between Host PC and Target System for FLASH programming

UDE Memtool supports the communication channels ASC, SSC, CAN, DXCPL and JTAG via Access Devices and can use the ASC bootstrap loader and CAN bootstrap loader for FLASH programming.

Supported External FLASH Memories and Devices

Parallel-NOR-FLASHs (AMD AM29x, M29x, Intel i28Fx)
Serial EEPROMs (I2C, SPI, SPIFI)
NAND-FLASH (on demand)
Further devices under development or on request.

The debugging tool Universal Debug Engine (UDE) features the On-Chip FLASH programming or external FLASH / OTP EPROM programming directly from within the Debugging Environment with the UDE Memtool FLASH programmer.