I want change the default target configuration settings.

To setup register settings, when UDE connects to the target, edit the values from the Config - Target Interface - Connect/Reset- Execute Initialisiation Commands page.

Syntax:

  SET <dst_register> <value> [<mask>]
  COPY <src_register> <dst_register> [<mask>]
  EINIT
  DISWDT

  <dst_register> | <src_register> := <register_addr> | <register_symbol>
  <value> := <hexnumber>h
  <mask> := <hexnumber>h

  <register_addr> := <hexnumber>h
  <register_symbol> := <textstring>

Action:

  SET: * = (* & ~) | ( & )
  COPY: * = (* | )
  EINIT: Execute EINIT command
  DISWDT: Disable Watchdog

Example:

Set the XPEN bit in SYSCON register independently from the WRL/BHE/WRH control.

  SET SYSCON 04h 04h